FCSS_NST_SE-7.4 Dumps Free Test Engine Player Verified Updated [Dec 13, 2025]
Q&As with Explanations Verified & Correct Answers
Fortinet FCSS_NST_SE-7.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 45
Refer to the exhibit, which shows the output of a policy route table entry.
Which type of policy route does the output show?
- A. A regular policy route, which is associated with an active static route in the FIB
- B. An ISDB route
- C. A regular policy route
- D. An SD-WAN rule
Answer: B
NEW QUESTION # 46
Refer to the exhibits, which show the configuration on FortiGate and partial internet session information from a user on the internal network.
An administrator would like to lest session failover between the two service provider connections.
Which two changes must the administrator make to force this existing session to immediately start using the other interface? (Choose two.)
- A. Change the priority of the port2static route to 5.
- B. Configure unset snap-route-changeto return it to the default setting.
- C. Change the priority of the port1static route to 11.
- D. Configure set snat-route-change enable.
Answer: C,D
Explanation:
set snat-route-change enable - With it disabled, existing SNAT sessions keep using the original egress interface even if routing changes. Enabling it lets the FortiGate remap the live session to the new route immediately.
Change port1 route priority to 11 - Raising port1's priority makes port2's route (priority 10) become the best path, so the session will switch to port2 once SNAT route change is allowed.
NEW QUESTION # 47
Refer to the exhibit, which shows the output of a BGP debug command.
Whatcan you conclude about the router in this scenario?
- A. The router 100.64.3.1 needs to update the local AS number in its BGP configuration in order to bring up the 8GP session with the local router.
- B. The BGP session with peer 10.127.0.75 is up.
- C. An inbound route-map on local router is blocking the prefixes from neighbor 100.64.3.1.
- D. All of the neighbors displayed are part of a single BGP configuration on the local router with the neighbor-range set to a value of 4.
Answer: B
NEW QUESTION # 48
Refer to the exhibit, which shows the output of a policy route table entry.
Which type of policy route does the output show?
- A. AnSD-WAN rule
- B. A regular policy route, which is associated with an active static route in the FIB
- C. An ISDB route
- D. A regular policy route
Answer: C
NEW QUESTION # 49
Refer to the exhibit, which shows the partial output of a real-time OSPF debug.
Why are the two FortiGate devices unable to form an adjacency?
- A. The Hello packet is being sent from an OSPF router with ID 0.0.0.112.
- B. The passwords on the FortiGate devices do not match.
- C. The two FortiGate devices attempting adjacency are in area 0.0.0.0.
- D. One FortiGate device is configured to require authentication, while the other is not.
Answer: D
NEW QUESTION # 50
Which exchanges are the first two exchanges in IKEv2 negotiation?
- A. Key Exchange and Authentication
- B. IKE SA_INIT and IKE_Auth
- C. INIT_Req and Auth_Request
- D. Init_Req and Wait_Init_Req
Answer: B
Explanation:
The first IKEv2 exchange is the SA_INIT, where algorithms, nonces, and Diffie Hellman values are negotiated. The second is the AUTH exchange, which carries peer authentication and completes the IKE SA setup.
NEW QUESTION # 51
Exhibit.
Refer to the exhibit, which shows the output of a diagnose command.
What can you conclude about the debug output in this scenario?
- A. The first server provided to FortiGate when it performed a DNS query looking for a list of rating servers, was 121.111.236.179.
- B. There is a natural correlation between the value in the FortiGuard-requests field and the value in the Weight field.
- C. Servers with a negative TZ value are less preferred for rating requests.
- D. FortiGate used 64.26.151.37 as the initial server to validate its contract.
Answer: B
NEW QUESTION # 52
The local OSPF router is unable to establish adjacency with a peer.
Which two things should the administrator do to troubleshoot the issue? (Choose two.)
- A. Check if there is an active static route to the peer.
- B. Check if IP protocol 89 is blocked.
- C. Check whether TCP port 179 is blocked.
- D. Check whether both peers have an IP address within the same subnet.
Answer: B,D
NEW QUESTION # 53
Refer to the exhibit, which shows the output of a BGP debug command.
Why has the local router at 172.16.23.58 been unable to establish adjacency with its only neighbor?
- A. The local router has not received a SYN/ACKpacket from the neighbor.
- B. The local router has not received an OPENmessage from the neighbor.
- C. The local router has not received a keepalivemessage from the neighbor.
- D. There is no active route to the BGP neighbor.
Answer: A
Explanation:
In BGP's Connect state the router has sent the initial TCP SYN but hasn't received the SYN/ACK from its peer, so the TCP handshake never completes and adjacency can't form.
NEW QUESTION # 54
Refer to the exhibit, which shows the partial output of command diagnose debug rating.
In this exhibit, which FDS server will the FortiGate algorithm choose?
- A. 64.26.151.37
- B. 209.22.147.36
- C. 208.91.112.194
- D. 66.117.56.37
Answer: A
NEW QUESTION # 55
Refer to the exhibit, which shows a partial web fillet profile configuration. Which action does FortiGate lake if a user attempts to access www.dropbox.com, which is categorized as File Sharing and Storage?
- A. FortiGate exempts the connection, based on the Web Content Filter configuration.
- B. FortiGate blocks the connection, based on the FortiGuard category based filter configuration.
- C. FortiGate allows the connection, based on the URL Filter configuration.
- D. FortiGate blocks the connection as an invalid URL.
Answer: B
NEW QUESTION # 56
Refer to the exhibit, which shows a session entry.
Which statement about this session is true?
- A. It is an ICMP session from 10.1.10.1 to 10.200.5.1.
- B. It is an ICMP session from 10.1.10.10 to 10.200.1.1.
- C. Return traffic to the initiator is sent lo 10.200.1.254.
- D. Return traffic to the initiator is sent to 10.1.0.1.
Answer: A
NEW QUESTION # 57
Which two statements are true regarding heartbeat messages sent from an FSSO collector agent to FortiGate? (Choose two.)
- A. The heartbeat messages can be seen on FortiGate using the real-lime FSSO debug.
- B. The heartbeat messages can be seen using the command diagnose debug authd fsso list.
- C. The heartbeat messages must be manually enabled on FortiGate.
- D. The heartbeat messages can be seen in the collector agent logs.
Answer: A,D
NEW QUESTION # 58
Refer to the exhibit, which shows a FortiGate configuration. An administrator is troubleshooting a web filter issue on FortiGate.
The administrator has configured a web filter profile and applied it to a policy; however, the web filter is not inspecting any traffic that is passing through the policy.
What must the administrator do to fix the issue?
- A. Disable webfilter-force-offat the VDOM level.
- B. Set sdns-server-ipto service.fortiguard.net.
- C. Disable webfilter-force-off.
- D. Change protocolto TCP and port to 53.
Answer: C
Explanation:
The global "kill switch" for web filtering is turned on (set webfilter-force-off enable), which bypasses all web filters. You need to turn it off (for example with config system fortiguard set webfilter-force-off disable) so that your web filter profile will actually inspect traffic.
NEW QUESTION # 59
Refer to the exhibit, which contains the output of diagnose vpn tunnel list.
Which command will capture ESP traffic for the VPN named DialUp_0?
- A. diagnose sniffer packet any 'host 10.0.10.10'
- B. diagnose sniffer packet any 'esp and host 10.200.3.2'
- C. diagnose sniffer packet any 'ip proto 50'
- D. diagnose sniffer packet any 'port 4500'
Answer: D
NEW QUESTION # 60
Exhibit 1.
Exhibit 2.
Refer to the exhibits, which show the configuration on FortiGate and partial internet session information from a user on the internal network.
An administrator would like to lest session failover between the two service provider connections.
Which two changes must the administrator make to force this existing session to immediately start using the other interface? (Choose two.)
- A. Change the priority of the port! static route to 11.
- B. Configure setsnat-route-change enable.
- C. Change the priority of the port2 static route to 5.
- D. Configure unsetsnat-route-change to return it to the default setting.
Answer: A,B
NEW QUESTION # 61
Refer to the exhibit, which shows one way communication of the downstream FortiGate with the upstream FortiGate within a Security Fabric.
What three actions must you take to ensure successful communication? (Choose three.)
- A. Ensure the port for Neighbor Discovery has been changed.
- B. You must enable Security Fabric/Fortitelemetry on the receiving interface of the upstream FortiGate.
- C. FortiGate must not be in NAT mode.
- D. You must authorize the downstream FortiGate on the root FortiGate.
- E. Ensure TCP port 8013 is not blocked along the way.
Answer: B,D,E
Explanation:
Authorize the downstream FortiGate on the root FortiGate.
Only registered/authorized devices can join the Security Fabric.
Ensure TCP port 8013 is not blocked along the path.
Port 8013 carries the Fabric control/telemetry session, so it must be open end to end.
Enable Security Fabric/FortiTelemetry on the upstream FortiGate's receiving interface.
Telemetry must be activated on the interface that accepts the downstream FortiGate's connection.
NEW QUESTION # 62
Exhibit.
Refer to the exhibit, which shows a partial output of diagnose hardware aysinfo memory.
Which two statements about the output are true? (Choose two.)
- A. The user space has 708880 kB of physical memory that is not used by the system.
- B. There are 98908 kB o! memory that will never be used.
- C. The value indicated next to the inactive heading represents the currently unused cache page.
- D. The I/O cache, which has 641364 kB of memory allocated to it.
Answer: B,C
NEW QUESTION # 63
Refer to the exhibits.
An administrator Is expecting to receive advertised route 8.8.8.8/32 from FGT-A. On FGT-B, they confirm that the route is being advertised and received, however, the route is not being injected into the routing table.
What is the most likely cause of this issue?
- A. FGT-B is configured with a prefix list denying the 8.8.8.8/32 network to be injected into the routing table.
- B. The administrator has misconfigured redistribution of routes on FGT-A.
- C. A batter route to the 8.8.8.8/32 network exists in the routing table.
- D. FGT-8 is configured with a distribution list denying the 8.8.8.8/32 network to be injected into the routing table.
Answer: A
NEW QUESTION # 64
Refer to the exhibit, which shows the output of the get router info bgp summary command.
Which statement regarding adjacencies between the local router and its neighbors is correct?
- A. The local router and neighbor 100.64.2.254are unable to establish adjacency because their BGP table versions are different.
- B. The local router and neighbor 100.64.2.254are unable to establish adjacency because AS 100 is already used by neighbor 100.64.1.254.
- C. The local router and neighbor 100.64.1.254established adjacency because their BGP table versions are identical.
- D. The local router and neighbor 100.64.2.254are unable to establish adjacency because the TCP session could not be established.
Answer: D
Explanation:
The "never" in the Up/Down column for 100.64.2.254 indicates the BGP TCP connection was never brought up, so no adjacency was formed.
NEW QUESTION # 65
Refer to the exhibit, which shows the output ofa debug command.
Which two statements about the output are true? (Choose two.)
- A. There are a total of five OSPF routers attached to the vorz4 network segment
- B. The interlace is part of the OSPF backbone area.
- C. One of the neighbors has a router ID of 0.0.0.4.
- D. In the network connected to port4, two OSPF routers are down.
Answer: B,D
NEW QUESTION # 66
......
Verified FCSS_NST_SE-7.4 dumps Q&As Latest FCSS_NST_SE-7.4 Download: https://testking.practicematerial.com/FCSS_NST_SE-7.4-questions-answers.html
